ANALISIS MANUFACTURING READINESS LEVELS (MRL) PT DAHANA DALAM IMPLEMENTASI PROGRAM PENGEMBANGAN PROPELAN SPHERICAL POWDER
Abstract
Pembangunan Industri Pertahanan dilakukan dengan tujuan agar membangun industri yang kuat dan mandiri. Pembangunan pabrik propelan spherical powder di PT DAHANA diharapkan memenuhi kebutuhan propelan sehingga dihasilkan kemandirian dalam industri pertahanan. Industri yang bergerak di bidang manufaktur harus mampu melihat kemampuannya dalam proses pengembangan produk. Metode yang dilakukan yaitu penelitian kombinasi (mixed methods) melakui kombinasi antara metode kualitatif dengan metode kuantitatif. Hasil pengolahan data menjelaskan bahwa tingkat kesiapan manufaktur PT DAHANA dalam produksi propelan melalui implementasi program pembangunan pabrik propelan spherical powder berada pada tingkat MRL 2 dengan persentase yaitu 88% dan berada pada tahap pra-pengambilan keputusan pengembangan kemampuan dan solusi material. Analisis terhadap tingkat elemen risiko manufaktur berada pada tingkat MRL 2, MRL 3, dan MRL 4. Pencapaian MRL 3 dan MRL 4 untuk elemen risiko ini dapat dijelaskan melalui terpenuhinya beberapa kriteria dalam tingkat MRL 3 dan MRL 4.
Kata Kunci: Industri Pertahanan, Kemandirian Industri Pertahanan, Manajemen Industri, Tingkat Kesiapan Manufaktur, Elemen Risiko Manufaktur.
References
Buku
Buku PT DAHANA. (2019). From Nothing To Be Something: Sepenggal Kisah Transformasi Perusahaan 1966-2019. Jakarta: Balai Pustaka.
D’File Edisi 90 Februari 2019. (2019). Resmikan Pabrik Baru, DAHANA Wujudkan Kemandirian Bahan Peledak Nasional. Majalah DAHANA. hlm. 1-24.
DOD. (2018). Manufacturing Readiness Level (MRL) Deskbook Version 2018. US: OSD Manufacturing Technology Program with the Joint Service/Industry MRL Working Group.
Wheeler, D., & Michael, U. (2009). Manufacturing Radiness Assessment for Fuel Cell Stacks and System for the Back-up Power and Material Handling Equipment Emerging Markets, Technical Report NREL/TP-560-45406. United States: National Renewable Energy Laboratory.
Morgan, Jim. (2007). Manufacturing Readiness Levels (MRLs) and Manufacturing Readiness Assessments (MRAs), Performed by AFRL/RXMT, Report Documentation. US: Manufacturing Technology Division.
Morgan, Jim. (2015). Manufacturing Readiness Assessment Overview. USA: Airfoce Research Lab.
Creswell, John Williams. (1994). Research Design: Qualitative, Quantitative and Mixed Method Approach: Second Edition. USA: Sage Publication.
KINA Edisi 2. (2012). Bangkitnya Industri Pertahanan Lokal. Jakarta: Media Ekuitas Produk Indonesia. hlm. 1-62.
Sugiyono. (2011). Metode Penelitian Kualitatif dan R&D. Jakarta: Alfabeta.
Bahan Ajar
Sofyan, Bondan Tiara. (2018). Kebijakan Pengembangan Kemampuan Industri Propelan di Indonesia. PPT yang disampaikan pada Seminar Propelan di PT Pindad, Tanggal 8 Mei 2018.
Undang-undang
Undang-undang Nomor 3 Tahun 2002 tentang Pertahanan Negara.
Lain-lain
Keputusan Menteri Pertahanan Nomor 1008 Tahun 2017 tentang Kebijakan Pertahanan Negara Tahun 2018.
Peraturan Menteri Pertahanan RI Nomor 11 Tahun 2009 tentang Rencana Kerja Pembangunan Pertahanan Negara Tahun 2010.
Jurnal
Fitri, A., & Debora, S. (2019). Pemberdayaan Industri Pertahanan Nasional dalam Pemenuhan Minimum Essential Forces (MEF). Kajian Singkat Terhadap Aktual dan Strategis, 11(22), 25-30.
Hayuningtyas, M., & Taufik, D. (2018). System Analysis for Technology Transfer Readiness Assessment of Horticultural Postharvest. International Conference on Industrial and System Engineering (IConISE), 337, 1-7.
Samego, Indria. (2015). Kontekstualisasi ‘Sishanneg’: Pemberdayaan Wilayah Pertahanan dalam Perspektif Perubahan. Jurnal Pertahanan, 5(1), 1-14.
Jung, K., Boonserm, K., Sangsu, C., & Michael P. B. (2016). An Overview of a Smart Manufacturing System Readiness Assessment. International Federation for Information Processing AICT 488, 2016, 705–712.
Siahaan, T., Sovian, A., & Egkrateia, P. (2018). Analisis Kesiapan PT. Pindad dalam Memproduksi Brass Cup Sebagai Bahan Baku Munisi Guna Mendukung Pertahanan Negara. Jurnal Pertahanan dan Bela Negara.
Website
Kementrian Perindustrian Republik Indonesia. (2018). “Mewujudkan Mimpi Besar Industri Pertahanan”, dalam http://www.kemenperin.go.id/artikel/12334/Mewujudkan-Mimpi-Besar-Industri-Pertahanan, diakses pada 8 Oktober 2018.
Pindad. (2018). “Pindad Gelar Seminar Nasional Propelan”. dalam https://www.pindad.com/pindad-gelar-seminar-nasional-propelan, diakses pada 13 Juli 2018.
Downloads
Published
Issue
Section
License
Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
