PENENTUAN LIFETIME MATERIAL SENJATA RINGAN SS2-V4 KALIBER 5,56MM DENGAN PENDEKATAN KEHANDALAN

Authors

  • Tri Sutrisno Universitas Pertahanan Indonesia
  • Yayat Ruyat Universitas Pertahanan Indonesia
  • Deni Dadang Ahmad Universitas Pertahanan Indonesia

DOI:

https://doi.org/10.33172/tsj.v2i1.580

Abstract

Pemeliharaan persenjataan perlu mengetahui usia pakai (lifetime) material pada setiap komponen. Permasalahan yang saat ini dialami oleh satuan pemeliharaan Peralatan AD, senjata ringan khususnya Senapan SS2-V4  Kal. 5,56 mm yang masih dimiliki satuan-satuan tempur, belum mempunyai jadwal periodik penggantian part (Perodical Replacement Part/ PRP) yang dapat memprediksi lifetime material komponen dalam pemeliharaannya. Penentuan lifetime pada material komponen SS2-V4 Kal. 5,56 mm dapat diketahu dengan pendekatan kehandalan. Dengan mengidentifikasi frekuensi kerusakan komponen, komponen kritis pada senjata SS2-V4 Kal.5 56 mm dapat diketahui bahwa, yaitu pena pemukul, rakitan tangkai penegang, penahan pegas pengembali, dan pasak pembatas pena pemukul. Tahapan pemrosesan data dengan menghitung distribusi kerusakan pada komponen kritis dihasilkan nilai distribusi Weibull = 0,9913 dengan parameter ?=33,09 dan ?=3011,14, dan membuktikan laju kerusakan terjadi peningkatan. Selanjutnya, tahapan penentuan lifetime, didapatkan nilai MTTF=2961. Batas nilai reliability yang ditetapkan untuk penggantian pada setiap komponen kritis meningkatkan lifetime, yaitu pena pemukul dan pasak pembatas pena pemukul (batas reliability 90%, tembakan ke-2813) meningkatkan lifetime 32,66%, rakitan tangkai penegang (batas reliability 70%, tembakan ke-2918) meningkatkan 12,86% dan penahan pegas pengembali (batas reliability 80%, tembakan ke-2877) meningkatkan lifetime 22,79%.

Kata Kunci: Maintenance, Lifetime, Kehandalan, Komponen Kritis, SS2-V4 Kal.5, 56 mm

References

Jurnal

Abidin, Razali. “Investigation on Spring Characteristic for Small Arms”, Journal of Fundamental and Applied Science, 2017.

Firmansyah, Ade. “Analisis Waktu Antar Kerusakan Mesin Electric Motor Menggunakan Metode Failure Finding Interval (Studi Kasus di PT.XYZ)”, Jurnal Teknik Industri FT USU, 2013.

Iriana, Yani, “Usulan Waktu Perawatan Berdasarkan Keandalan Suku Cadang Kritis Bus di Perum Damri Bandung”, Proceeding 6th National Industrial Engineering Conference (NIEC-6), 2011.

Gao, Jian, T. L, “Study on the Reserve Structure of Light Weapons”, ICATA 2018, 2nd International Conference on Artificial Intelligence Technologies and Apllications, 2018.

Tyas, N00rahma A. “Penentuan Kebijakan Waktu Optimum Perbaikan Komponen Heat Exchanger (HE) Pesawat Boeing 737-800 Menggunakan Metode Power Law Process di PT. Garuda Maintenance Facility (GMF) Aero Asia”, Jurnal Sains dan Seni ITS, 2016.

Wahyuniardi, Rizki & Arumsari H. “Penentuan Interval Perawatan dengan Menggunakan Model Age Replacement di PT.X”, Seminar Nasional Mesin dan Industri (SNMI X, 2016, hlm. 174-180.

Buku

Department of Defense United States of America. “Condition Based Maintenance Plus DoD Guidebook”, (Washington: Department of Defense United States of America, 2008), hlm. 18.

Ebeling, Charles. “An Introduction to Reliability and Maintainability Engineering”, (Pennsylvania: McGraw-Hill,1997), Hlm 58-64; 400-401.

Sugiyono. “Metode Penelitian Kuantitatif, Kualitatif, dan R&D's”, (Bandung: Alfabeta, 2014).

Website

Ryacudu, Ryamizard Menhan, “Kebijakan Pertahanan Negara Tahun 2019” dalam https://nasional.kompas.com/read/2019/02/21/11015331/menhan-beberkan-kebijakan-pertahanan-negara-tahun-2019?page=all, diakses 10 Agustus 2019

PT. Pindad, “Spesifikasi Senjata SS2-V4 Kal 5,56 mm”, PT.Pindad, Indonesian, dalam https://www.pindad.com/ss2-v4-cal-556-mm, diakses 11 Agustus 2019

Lainnya

Fithri, Prima. “Optimasi Preventive Maintenance dan Penjadwalan Penggantian Komponen Mesin Kompressor dengan menggunakan Mixed Integer Non Linear Programming dari Kamran”, Tesis Program Pasca Sarjana Teknik Industri, FTUI, 2010, hlm. 40-78.

Peraturan Menteri Pertahanan Republik Indonesia Nomor 38 Tahun 2014 tentang Pedoman Penyelenggaraan Pemeliharaan Senjata Api di Lingkungan Kemenhan dan TNI.

Downloads

Published

2020-03-09

Issue

Vol. 2 No. 1 (2020): Jurnal Teknologi Persenjataan

Section

Articles

License

Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)

Most read articles by the same author(s)