ANALISIS DAN KARAKTERISASI FUELBINDER PROPELAN KOMPOSIT PADAT SEBAGAI UPAYA MEWUJUDKAN KEMANDIRIAN PRODUKSI PROPELAN ROKET DI LEMBAGA PENERBANGAN DAN ANTARIKSA NASIONAL
DOI:
https://doi.org/10.33172/tsj.v2i1.678Abstract
Penyusun utama propelan komposit padat terdiri dari oksidator dan fuelbinder. Hydroxy-terminated Polybutadiene (HTPB) merupakan cairan bening yang sering digunakan sebagai binder dalam propelan komposit padat berkisar 15% – 20%. Tujuan dari penelitian ini adalah untuk menganalisis pengaruh karakteristik HTPB dan pengaruh parameter kunci terhadap penurunan kinerja propelan LAPAN. Penelitian dilakukan secara kuantitatif menggunakan metode eksperimen. Sampel yang digunakan pada penelitian ini ada empat, yaitu Cina (2018 dan 2016), Korea (Hanwa) dan Indonesia (LAPAN). Hasil karakterisasi viskositas HTPB berturut-turut 50,88 P; 58,88 P; 56,27 P dan 24,61 P, semua sampel berada jauh diatas standar, yaitu 0,5P. Nilai densitas hasil pengujian 0,9036 g/ml; 0,9025 g/ml, 0,9039 g/ml; dan 0,9161 g/ml, dimana sampel LAPAN memiliki nilai paling dekat dengan standar 0,92 g/ml. Hasil uji indeks bias 1,512; 1,512; 1,513 dan 1,511, sampel LAPAN memiliki nilai linear dengan nilai viskositasnya. Hasil uji bilangan hidroksil 40,4198 g/cm3; 48,7627 g/cm3; 24,579 g/cm3; dan 35,385 g/cm3, hanya satu sampel yang memenuhi standar IUPAC 45 g/cm3. Pengujian menggunakan instrumen FTIR menghasilkan pembacaan terhadap isomer cis pada 723 nm - 727 nm, vinil di frekuensi yang sama 910,4 nm dan trans pada 960 nm – 964 nm. Hidroksil sekunder pada panjang gelombang 2900 nm dan 3450 nm serta epoksi pada 3050 sesuai dengan referensi. Hasil uji menggunakan NMR menghasilkan pembacaan cis, trans dan vinil sesuai dengan rentang pergeseran kimia. Berdasarkan perhitungan menggunakan software statistik, parameter yang berpengaruh terhadap nilai Isp adalah densitas, yang berpengaruh terhadap kepekaan terhadap termal.
Kata kunci: densitas, HTPB, karakterisasi, LAPAN, propelan komposit
References
Buku
Boustead, Ian. (2005). Eco-profiles of The European Plastics Industry :
| Jurnal Prodi Teknologi Persenjataan | Volume 2 Nomor 1 Tahun 2020
Tolylene diisocyanate (TDI). Brussels: Plastics Europe.
Pertahanan, K. (2014). Doktrin Pertahanan Negara. Jakarta: Kementrian Pertahanan.
Setyaningsih, D. (2016). Propelan Padat Komposit. Bogor: LAPAN.
Sutrisno. (1997). Pengaruh Elemen Aditif Terhadap Sifat-Sifat Propelan Padat Polibutadien – HTPB. Indonesia: Universitas Indonesia.
Sutton, G. P. (2001). Rocket Propulsion Elements. United States of Amerika: John Wiley & Sons.
Jurnal
Dey, A., Arun. K. dan Javid A. (2017). Micro-structural Effect on Hydroxy Terminated Poly Butadiene (HTPB) Prepolymer and HTPB Based Composite Propellant. Journal of Molecular Nanotechnology and Nanomedicine, 1-7.
Degirmenci, E., 2015, Effect of Grain Size and Temperature of Double Base Solid Propellants, Journal of Fuel Elsevier, Vol 146, Page 95-120.
Iskandar, M. A. (2018). Kebijakan Strategis Dalam Pembangunan dan Pengembangan Industri Pertahanan. Universitas Pertahanan tanggal 25 September 2018: Komite Kebijakan Industri Pertahanan.
Khotimah, Putri Dessy Primia K. (2018). Pemanfaatan Limbah Koran Sebagai Alternatif Bahan Baku Nitroselulosa Untuk Pengembangan Kemandirian Industri Propelan di Indonesia. Bogor: Universitas Pertahanan.
Nikje, Mir Mohammad A. Dan Maryam G. N., (2014). Cloiste 15 Ao Nanoclay as an Effective PTC for the Epoxidation of Hydroxyl Terminated Polybutadiene (HTPB). Polimeros, Vol. 24, No. 5, 536-540.
Rosita, G. (2011). Pengaruh Jumlah Katalisator, Waktu Reaksi dan Waktu Alir Gas Bitadien Terhadap Pembentukan Hydroxyl Terminated Polybutadien (HTPB). Majalah Sains dan Teknologi Dirgantara, Vol. 6, No. 2, 71-76.
Sofyan, B. T. (2018). Policy for Capability Development of Smokeless Powder Propellant in Indonesia. Ditjen Pothan.
Whitmore, Stephen A. (2011). Analytical and Experimental Comparison of HTPB and ABS as Hybrid Rocket Fuels. 47th AIAA/ASME/SAE/ASEE
Joint Propulsion Conference & Exhibit. San Diego.
Wibowo, H. B. (2018). Current Solid Propellant Research and Development in Indonesia and Its Future Direction. Journal of Physics : Conf. Series 1130, 6th International Seminar of Aerospace Science and Technology, 1-11.
Downloads
Published
Issue
Section
License
Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
