KAJIAN POTENSI PENGEMBANGAN MATERIAL KOMPOSIT BERPENGUAT BAHAN ALAM UNTUK DIAPLIKASIKAN SEBAGAI BODY ARMOR

Penulis

  • Luk Lu Atun Nisa Universitas Pertahanan RI
  • Maykel TE Manawan Universitas Pertahanan RI

Abstrak

Salah satu jenis komposit yang saat ini mengalami perkembangan yaitu pemanfaatan serat alam sebagai salah satu jenis bahan penyusun komposit. Di indonesia tumbuh berbagai macam tanaman, yang dapat dimanfaatkan seratnya sebagai penguat komposit. Pemanfaatan serat alam ini salah satunya dikarenakan, serat alam merupakan bahan yang bersifat biodegredable/bisa didaur ulang. Dengan mampu mengetahui komposisi, dan karakteristik dasar pada material komposit berbahan dasar serat alam, maka dapat dijadikan sebagai dasar penelitian untuk kedepannya. Metode yang digunakan dalam beberapa penelitian pemanfaatan serat alam merupakan metode eksperimen dengan beberapa tahapan meliputi pembuatan specimen, dilanjutkan dengan pengujian seperti uji impak, uji tarik maupun uji balistik. Paper ini disusun untuk mereview tentang pengembangan serat alam sebagai bahan body armor sehingga dapat dijadikan sebagai panduan dalam penelitian lebih lanjut.

Referensi

Asmoro Aji, Topan dkk. (2018). Pengaruh Ketebalan Komposit Matrik Resin Dengan Penguat Kulit Eceng Gondok (Eichhornia crassipes) Yang Dianyam Terhadap Kemampuan Balistik. Momentum, Vol. 14, No. 1, April 2018, Hal. 75-79 ISSN 0216-7395

Astana Widi, Komang dkk. (2020). Analisa Uji Balistik Produk Body Armor Material Komposit Poliester Berpenguat Serat Karbon, Rami dan Kapas. Prosiding Seminar Nasional Teknik Tahun 2020 (SENASTIKA 2020) Universitas Islam Kalimantan MAB

ASTM. D 393 – 00 “Standart Test Method For Flexial Properties of Sandwich Construction”. Philadelphia, PA : American Society for Testing and Materials.

Badan Pusat Statistik (BPS), 2019. Statistik Tanaman Buah-buahan dan Sayuran Tahunan Indonesia. s.l.:Badan Pusat Statistik/ BPS-Statistics Indonesia.

Cavallaro, Paul V. (2011). Soft Body Armor: An overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics. NUWC-NPT Technical Report 12,057 1 August 2011. https://www.researchgate.net/publication/267725942.

Damaru, Restu dkk. (2021). Resin Composite Synthesis Reinforced with Banana Tree Fiber with Carboxylic Silica (SiO2-COOH) Addition as a Nanofiller. Indonesian Journal of Chemical Science 10 (1) (2021)

Eka A, Nur Agnes dkk. (2021). Analisis Komposisi Serat Kevlar, Karbon dan Pelepah Salak terhadap Kekuatan Impak Komposit dengan Metode VARTM. Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta (2021), p1588-p1593

Galindra dkk. (2021). Kaji Eksperimental Material Komposit Berpenguat Serat Daun Nanas Pada Pengujian Balistik. Prosiding Seminar Nasional Inovasi Teknologi Terapan 2021.

Iskandar Fajri, Rahmat dkk. (2013). Studi Sifat Mekanik Komposit Serat Sansevieria Cylindrica Dengan Variasi Fraksi Volume Bermatrik Polyester. JURNAL FEMA, Volume 1, Nomor 2, April 2013.

Nanda Utama, I Made Prabawa dkk. (2018). Analisa Uji Impak Komposit Matriks Poliester-Karet 30%, 40%, 50% Penguat Serat Karbon, Rami, Dan Agave Sebagai Body Armor. https://e-dokumen.id/dokumen/11b33_analisa-uji-impak-komposit-matriks-poliester.html.

Oksman, K et al. (2003). Natural fibers as reinforcement in polylactic acid (PLA) composites. Composites Science and Technology 63 (2003).1317–1324. 003. doi:10.1016/S0266-3538(03)00103-9.

Prasetyaningrum, A. (2009). Optimasi Proses Pembuatan Serat EcengGondok Untuk Menghasilkan Komposit Serat Dengan Kualitas Fisik dan Mekanik yang Tinggi. Jurnal RIPTEK, Vol. 03, Teknik Kimia, Universitas Diponegoro, Semarang.

Priyanka, Pragati et al. (2019). High-strength Kevlar fiber reinforced advanced textile composites. Iranian Polymer Journal https://doi.org/10.1007/s13726-019-00721-7.

Rahmadhani, Lazuardi dkk. (2018). Pengaruh Posisi Vacuum Gate Terhadap Waktu Infuse Pada Proses Vacuum Assisted Transfer Molding. Jurnal STATOR, Volume 1 Nomor 1, Januari 2018

Hsiao, K.T. (2012). Vacuum-assisted resin transfer molding (VARTM) in polymer matrix composites. Woodhead Publishing Limited.

Stopforh, Riaan & Sarp Adali. (2018). Experimental study of bullet-proofing capabilities of Kevlar, of different weights and number of layers, with 9 mm projectiles. Def. Technol., vol. 15, no. 2, pp. 186–192, 2019, doi: 10.1016/j.dt.2018.08.006.

Supriyatna, A. & Solihin, M. Y., 2018. Pengembangan Komposit Epoxy Berpenguat Serat Nanas untuk Aplikasi Interior Mobil. Jurnal Ilmiah TEKNOBIZ, Volume 8, p. 89.

Teguh Setyawan, Reinaldi & Slamet Riyadi. (2020). Analisis Variasi Struktur Serat Rami Komposit Matrik Epoksi Terhadap Kekuatan Uji Balistik Dan Bending. Momentum, Vol. 16, No. 2, Oktober 2020, Hal. 111-115.

U.S. Department of Justice, 2001. NIJ-0101.04. Washington, DC: National Institute of Justice.

Yudo, H & Kiryanto. (2007). Analisa Teknis dan Ekonomis Penggunaan Serat Ijuk Sebagai Alternatif Bahan Komposit Pembuatan Kulit Kapal Ditinjau Dari Kekuatan Tarik. Jurnal Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro, Semarang.

Unduhan

Diterbitkan

2022-06-30

Terbitan

Vol 5 No 1 (2022): Jurnal Teknologi Daya Gerak

Bagian

Articles

Lisensi

Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)