DESAIN KONSEPTUAL ARMOURED PERSONNEL CARRIER REMOTE CONTROL WEAPON SYSTEM TERHADAP KEBUTUHAN PERSERIKATAN BANGSA BANGSA

Authors

  • Indra Wahyu Setiawan Universitas Pertahanan Indonesia
  • Jupriyanto Jupriyanto Universitas Pertahanan Indonesia
  • Wibisono Poespitohadi Universitas Pertahanan Indonesia

DOI:

https://doi.org/10.33172/tsj.v1i2.478

Abstract

Armoured Personnel Carrierdibutuhkan pada sebuah misiPerserikatan Bangsa Bangsa untuk menjalankan misi memelihara perdamaian, Tugas memelihara perdamaian memerlukan konfigurasi APC tertentu, Sehingga Penelitian ini bertujuan untuk Menganalisis Kebutuhan konsep perancangan APC terhadap kebutuhan PBB dan Menganalisis model desain konseptual APC sesuai Persyaratan operasi di PBB, Untuk Menyelesaikan permasalahan agar mencapai Tujuan Penelitian tersebut, Penelitian ini menggunakan pendekatan perancangan konseptual desain dengan tahapan  Mendefinisikan masalah, Mengumpulkan Informasi, Membuat Concept, Evaluasi dan memilih Konsep, Berdasarkan tahapan penelitian konseptual tersebut diperoleh persyaratan kebutuhan operasional sesuai kebutuhan PBB dan  Rancangan konseptual desain berupa konfigurasi I dan II yaitu konfigurasi Minimum dan Konfigurasi maximum untuk misi PBB.

Kata Kunci: Persyaratan operasi PBB, Rancangan Konseptual, ArmouredPersonnelCarrier

References

Undang-undang

Pembukaan UUD 1945 Alinea ke 4

Peraturan Menteri Luar Negeri Republik Indonesia Nomor 1 tahun 2017,Perubahan atas peraturan Menteri luar Negeri nomor 05 Tahun 2015 Tentang Peta Jalan VISI 4.000 Personel Pemeliharaan Perdamaian 2015-2019 (RoadMap Vision 4.000 PeaceKeepers 2015-2019)

Buku/Tesis/MoU

Bumi, Ilmi Mayuni. 2017. “Optimasi Geometri Tube Torsion Bar Suspension Unit Panser ANOA 6x6 PT.Pindad dengan Metode Elemen Hingga”. Undergraduate Theses of Faculty of Industry Techonolgy, Surabaya : ITS.

Kadiman, Kusmayanto. 2014. Tanpa Gaptek dan Gupsos : Menuju Generasi Indonesia Bisa!. Jakarta : Gramedia Pustaka Utama.

Kemenhan. 2015. Buku Putih Pertahanan Indonesia, Jakarta : Kemenhan.

Manual Agreement (PMPP), The Statement of Unit Requirement for a Rapidly Deployable Battalion (SUR), may 2018

Jurnal/Artikel

David, Wong Yuan Chien, Lim Hong How Sebastian, dan Chan Wei Qiang Wilson. 2016. “An Assessment of Land Vehicle’ Trafficability”, Journal of DSTA Horizons.

Eep Saefulloh. 2017. “Pengaruh Putaran Mesin (Rpm) Terhadap laju Konsumsi Bahan Bakar pada Mobil Nissan CMW 330”. Journal of Mechanical Engineering and Machinery. Pontianak : UMP

Gumilar, Nugraha, Tri Legionosuko, dan Bintang Widagdo. 2017. “Deployment of Garuda Forces As Indonesia’s Defense Diplomacy in Order to Increase Indonesian National Army’s Major Equipment System”, Jurnal Prodi Diplomasi Pertahana. Vol.3, No.3

Rahmat, Angga Nurdin. 2016. “Diplomasi Publik Indonesia melalui Kontingen Garuda/UNIFIL Tentara Nasional Indonesia di Lebanon Selatan”, Jurnal Ilmiah Hubungan Internasional, Vol.12, Universitas Katolik Parahyangan

Internet

Anonim, Alutsista Pasukan TNI Kontingen Garuda XXIII-G/UNIFIL diperiksa Tim PBB, dalam http://prokimal-online.blogspot.com/2012/12/alutsista-pasukan-tni-kontingen-garuda.html, diakses pada tanggal 13 Agustus 2018

Anonimous, Lockheed C-130 Hercules,dalam http://theaviationzone.com/factsheets/c130_specs.asp, diakses pada tangga 10 januari 2019

Apinio, Rio. 2017. Kenali Kelebihan dan Kekurangan Mesin Diesel, dalam https://www.liputan6.com/otomotif/read/2852860/kenali-kelebihan-dan-kekurangan-mesin-diesel, diakses pada tanggal 20 januari 2019

CRAIG, Industry Ballistic and Stab Resistant Standards – NIJ Standard – 0101.04 Ballistic Resistance of Personal Body Armor (Revision A – June 2001) (Superceded), dalam http://ballistics.com.au/technical/industry-ballistic-stab-resistant-standards/#stanag. di akses pada tanggal 8 Januari 2019

Indomiliter. Anoa: Panser Amfibi “made in Indonesia”, dalam https://indomiliter.wordpress.com/2010/11/24/anoa-panser-amfibi-“made-in-indonesia”/, diakses pada tanggal 10 januari 2019

Indomiliter. FN DeFNder Medium: Opsi RCWS Modular untuk Panser Anoa 6 x 6 APC, dalam https://www.indomiliter.com/fn-defnder-medium-opsi-rcws-modular-untuk-panser-anoa-6x6-apc/, di akses pada tanggal 10 September 2018

Juli, Andi. 2016. Mengenal Dimensi Kendaraan, dalam http://lksotomotif.blogspot.com/2016/07/mengenal-dimensi-kendaraan.html, diakses pada tanggal 5 januari 2019

Kemenlu, Keterangan Dasar Mengenai Republik Demokratik Kongo, dalam https://www.kemlu.go.id/id/kebijakan/detail-kerjasama-bilateral.aspx?id=128, diakses pada tanggal 25 January 2019

Muchta, Amrie Muchta. 2018. 4 Jenis Mesin pada Mobil yang paling Menjamur di Indonesia, dalam https://www.autoexpose.org/2018/04/jenis-mesin-pada-kendaraan.html, diakses pada tanggal 10 januari 2019

Monusco. 2018. Monusco-UN map, dalam www.un.org/Depts?Cartographic/map/dpko/MONUSCO.pdf, diakses pada tanggal 25 Oktober 2018

Nugroho, Adi Nugroho. 2015. Inilah 7 Fakta Hebat dari Anoa, Kendaraan Lapis Baja Buatan Indonesia yang saat ini Mendunia, dalam https://www.boombastis.com/anoa-kendaraan-baja/57945, diakses pada tanggal 10 Agustus 2018

United Nations Peacekeeping, Our History, dalam https://peacekeeping.un.org/en/our-history, Diunduh 10 Agustus 2018

Downloads

Published

2019-04-14

Issue

Vol. 1 No. 2 (2019): Jurnal Teknologi Persenjataan

Section

Articles

License

Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)