OPTIMASI KEMAMPUAN COMBAT MANAGEMENT SYSTEM MANDHALA PADA PROYEKTIL OTO MELARA 76 MM PADA PARAMETER HAMBAT BALISTIK EKSTERNAL

Authors

  • Muhammad Abdul Qohhar Universitas Pertahanan Indonesia
  • Djoko Andreas Navalino Universitas Pertahanan Indonesia
  • I Nengah Putra Apriyanto

DOI:

https://doi.org/10.33172/tsj.v2i1.577

Abstract

Kemampuan Combat Management System (CMS) Mandhala, CMS Nasional, perlu ditingkatkan guna mendukung ketercapaian MEF Renstra agar mampu meciptakan efek gentar dan kemandirian Alat Peralatan Pertahanan dan Keamanan (Alpalhankam). CMS yang digunakan Tentara Nasional Indonesia Angkatan Laut (TNI AL) sebagai sarana kelengkapan pertempuran yang mengintegrasikan sistem deteksi dan sistem persenjataan. CMS Mandhala dikembangkan oleh PT LEN, perlu dioptimalkan kemampuannya agar mampu bersaing dengan CMS luar negeri. Penelitian ini meninjau lebih lanjut pada CMS Mandhala dengan meningkatkan kemampuan pada aspek balistik eksternal dengan analisis numerik parameter-parameter pada konsisi intern dan ekstern untuk meningkatkan kemampuan CMS Mandhala. Sehingga solusi persamaan balistik eksternal yang digunakan, mampu memberikan nilai dalam mengenai target lebih presisi dan akurat. Studi kasus yang digunakan dalam penelitian ini adalah Meriam Oto Melara 76mm yang dimiliki TNI AL pada Kapal Perang Republik Indonesia (KRI). Penelitian ini mengimplementasikan solusi persamaan matematis Chudinov dengan memunculkan hasil persamaan baru kemudian digunakan perangkat Matrix Laboratory (Matlab) untuk memunculkan hasil fungsi persamaan. Output yang digunakan adalah penentuan elevasi balistik, tinggi maksimum proyektil pada lintasan trayektori, dan waktu tempuh proyektil. Dengan meningkatnya kemampuan CMS Mandhala, diharapkan mampu memberikan pertimbangan dan rekomendasi kepada Pemerintah dan TNI AL untuk menggunakan produk dalam negeri.

Kata Kunci: Balistik Eksternal, Combat Management System Mandhala, Meriam Oto Melara 76 mm, Parameter hambat, Persamaan Chudinov.

References

Buku

Carlucci, DE., jacobson, SS. (2018). “Ballistics: Theory and Design of Guns and Ammunition”. CRC Press: United States. Page: 169-305.

Jonedi, Erik. (2016). Prospek Alih Teknologi Combat Management System (CMS) dalam Kerjasama antara Thales Belanda dengan PT. LEN Industri. Tesis. Program Magister Manajemen Pertahanan, Fakultas Manajemen Pertahanan, Universitas Pertahanan.

Kementerian Pertahanan Republik Indonesia. (2018). Buku Putih Pertahanan Indonesia. Jakarta. Hlm, 39

Kementerian Pertahanan. (2015). Postur Pertahanan Negara. Jakarta. Hlm. 36.

L. Chaffois., F. Gallicia., G. Bersano. (2015). “DART Projectile – IM tests Assesment”, IMEMTS.

Manual Handbook. (2006). Oto Melara SRGM 76 mm. Italy.

McCoy, RL. (1999). “Modern Exterrior Ballistics”. Schiffer Military History, Antgen, PA.

McShane, EJ., kelley, JL., and Reno, FV. (1953). “Exterior Ballistic”, University of Denver Press, Denver, CO.

Taufik, Asep. (2018). “Implementasi Supply Chain Management dalam Pengembangan Proyek Combat Management System di PT. XYZ untuk Mendukung KRI TNI Angkatan Laut”. Tesis. Program Magister Ekonomi Pertahanan, Fakultas Manajemen Pertahanan, Universitas Pertahanan.

Schield, F. (1983). Numerical Analysis. McGraw Hill International Editions: Singapore.

Jurnal

Akçay, Mehmet. (2018). “Development of Universal Flight Trajectory Calculation Method for Unguided Projectiles”, Technical and Project Management Department of Turkish Land Forces Command, Ankara, Turkey, 2004.

Chudinov, Peter S. (2002) “Approximate Analytical Investigation of Projection Motion in A Medium with Quadratic Drag Force”, International Journal of Nonlinear Sciences and Numerical Simulation, Perm State Agricultural Academy, Perm, Russia.

Hainz, LC. (2017) “Modified Projectile Linear Theory for Rapid Trajectory Prediction”. Journal of Guidance, Control, and Dynamics. Oregon State University, Vol.28, No.5.

Khan, Ibraheem Razaa. (2017). “Study of Internal & External Ballistics for .177 cal & .22 cal Projectiles”, BE Students, Department of Mechanical Engineering. International Journal for Scientific Research & Development, Vol. 5, Issue 07.

Nicolaides, JD. (1953). “On the Free Flight Motion of Missiles Having Slight Configurational Asymmetries”, Ballistics Research Laboratory Report No. 858, Aberdeen Proving Ground, MD.

Shouryya Ray., Jochen Frőhlich.,“An Analytical Solution to The Equations of The Motion of a Point Mass with Quadratic Resistance and Generalizations”, Institut fűr Strőmungsmechanik, Technische Universität Dresden, George-B¨ahr-Straße 3c, D-01062 Dresden, Germany.

Murphy, CH. (1963). “Free Flight Motion of Symmetric Missiles”, Ballistic Research Laboratory Report No. 216, Aberdeen proving Ground, MD.

Peraturan

Undang-Undang No. 16 Tahun 2012 mengenai Industri Pertahanan.

Downloads

Published

2020-03-09

Issue

Vol. 2 No. 1 (2020): Jurnal Teknologi Persenjataan

Section

Articles

License

Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)