DESAIN KONSEPTUAL PELURU KENDALI ANTI TANK SEBAGAI SENJATA PENDUKUNG INFANTERI TENTARA NASIONAL INDONESIA ANGKATAN DARAT (TNI AD)

Authors

  • Erna Shevilia Agustian Universitas Pertahanan Indonesia
  • Timbul Siahaan Universitas Pertahanan Indonesia
  • Masayu Elita Hafizah Universitas Pertahanan Indonesia
  • Arif Nur Hakim Universitas Pertahanan Indonesia

DOI:

https://doi.org/10.33172/tsj.v3i1.733

Abstract

Untuk dapat mewujudkan kemampuan produksi Peluru kendali (rudal) dalam negeri, khususnya rudal anti tank maka diperlukan proses desain produk yang sesuai dengan kebutuhan. Pada penelitian ini dilakukan desain konseptual rudal anti tank yang digunakan untuk Infanteri Tentara Nasional Indonesia Angkatan Darat (TNI AD) berdasarkan spesifikasi teknis dan jenis propelan yang digunakan pada motor roket padat. Metode kualitatif digunakan dalam menentukan kebutuhan pengguna (Infanteri TNI AD) terhadap spesifikasi teknis rudal anti tank dan motor roket padat dengan menggunakan propelan komposit. Penelitian dilakukan melalui kegiatan wawancara terhadap narasumber di tempat penelitian, serta kajian literatur yang relevan. Spesifikasi teknis rudal anti tank untuk Infanteri TNI AD memiliki kisaran Jangkauan lebih dari 2000 meter, Panjang sekitar 1 meter dengan Diameter kurang lebih 10 cm dan Massa rudal kurang dari atau sama dengan 10 kg. Infanteri TNI AD membutuhkan jenis rudal anti tank yang memiliki jarak jangkau jauh, berukuran kecil dan ringan. Adapun jenis propelan yang digunakan pada desain konseptual rudal anti tank ini adalah Komposit Propelan HTPB/AP/Al, karena dikenal memiliki sifat energetik yang kuat dan sifat mekanik yang baik

References

Abyan Muhammad Ihsan., Nuryaman, Aang., Jihad, Bagus Hayatul., Junjunan, Soleh Fajar (2020). Desain dan Analisis Geometri Propellant Grain Configuration pada Roket Padat. Jurnal Siger Matematika. Vol.01 No.02: hal 56 – 62.

Agrawal, J. P. (2010). High Energy Materials. New Delhi, India: WILEY-VCH Verlag GmbH & Co. KGaA.

Arthur, Gordon. (2012). Tanked Up – Regional Main Battle Tank Programmes. www.defencereviewasia.com. hlm 12-16

Abdillah, Luthfia Hajar., Wibowo, Heri Budi., Hartaya, Kendra (2018). Penggunaan Binder HTPB Berenergi Tinggi Untuk Meningkatkan Energetik Propelan Komposit. Jurnal Teknologi Dirgantara Vol.16 No.1: hal 35 – 44.

Berman, E. G., Jenzen-Jones, N., & Leff, J. (2017). Anti-Tank Guided Weapons. Small Arms Survey Research Notes, 1-4.

Dwiastuty, Fuji., Bura, Romie Oktovianus., Triharjanto, Robertus Heru (2019). Konsep Desain Peluru Kendali Untuk Kapal Cepat Rudal Indonesia. Jurnal Teknologi Persenjataan. Volume 1 Nomor 1.

Harris, J., & Slegers, N. (2009). Performance of a fire-and-forget anti-Tank missile with a damaged wing. Elsevier Ltd, 292–305.

Hasrito, E. S., & Kaharjito, F. A. (2015). Rancang Bangun Sistem Sensor pada Model Fuze Proximity untuk Mendukung Rudal Nasional. TESLA, 78-87.

Iskandar, M. A. (2019). Strategi Penguasaan Teknologi Industri Pertahanan Nasional. Universitas Pertahanan.

Kementerian Pertahanan RI-Badan Penelitian dan Pengembangan. (2016). Naskah Litbang tentang Pembuatan Prototipe Senjata Lawan Tank (SLT).

Maguire, Martin. Bevan, Nigel. 2002.“User Requirements Analysis”. Proceedings of IFIP 17th World Computer Congress, Montreal, Canada.P133-148.

Mahjub, A., Mazlan, N. M., Abdullah, M. Z., & Azam, Q. (2020). Design Optimization of Solid Rocket Propulsion: A Survey of Recent Advancements. Journal of Spacecraft and Rockets, hal. 3-11.

Melvin R, M. J. (1976). United States of America Patent No. 3945588.

Midhio, I. W. (2019). Postur Pertahanan Negara. Universitas Pertahanan.

Naumann, K., & L. Stadler. (2010). Double-Pulse Solid Rocket Motor Technology-Applications and Technical Solutions. Aiaa/Asme/Sae/Asee Joint Propulsion Conference & Exhibit.

NRS, Muda (2020). Studi Kasus 2: Teknologi Roket Pertahanan Indonesia. Universitas Pertahanan.

Prianto, Bayu (2008). Produksi Amonium Peklorat ????????4????????????4 sebagai Simbol Kemajuan Teknologi Roket dan Rudal . Berita Dirgantara Vol.9 No.1, 1-5.

Prasad, N. E., & Wanhill, R. (2017). Aerospace Materials and Material Technologies. Kanpur, Uttar Pradesh: Springer Science+Business Media Singapore.

Siahaan, T. (2019). Doktrin Hanneg. Universitas Pertahanan.

Triharjanto, R. H., Sofyan, E., Putro, I. E., Riyadl, A., & Mariani, L. (2007). Rancangan Awal Dan Strategi Pengembangan Rudal Jelajah Lapan. Jurnal Teknologi Dirgantara, 103-112.

Undang-Undang Republik Indonesia Nomor 16 Tahun 2012 Tentang Industri Pertahanan.

Zhang, D. Q. (2012). Design and Analysis of the Two-Stage FGM-148 Javelin Anti-Tank Missile. Rensselaer Polytechnic Institute Hartford, Connecticut.

Downloads

Published

2021-06-28

Issue

Vol. 3 No. 1 (2021): Jurnal Teknologi Persenjataan

Section

Articles

License

Proposed Policy for Journals That Offer Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Proposed Policy for Journals That Offer Delayed Open Access. Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access)